Ako ti trebaju momenti za one dvije vide na ekscentru kad natezeš lanac onda je to ovo:
Fit the inner bush (18) on wheel shaft (27), and position it so as the taper end is facing the shaft, as shown, then tighten the screws (3) to a torque of 31 Nm ±5% (Sect. 3 - 3, Frame torque settings) according to a 1-2-1 sequence.
Imam ti cijeli servisni manual za 796 i u puno stvari su slični osim u samoj makini.
Ne znam samo kako to sve skupa poslati nekomu :misli: :embarassed: